核心提示：FEATURES● Battery is not used.● 3digit LCD (2000-count).● Backlight function.● 15mA loop measurement...
| FEATURES |
● Battery is not used.
● 3 digit LCD (2000-count).
● Backlight function.
● 15mA loop measurement which will not trip ELCBs.
● Convenient and easier for users to
measure the loop impedance directly without bypassing the wires.
● Wiring check function.
● Over temperature protection.
● Over voltage protection.
● Built-in voltmeter.
● Built-in earth tester.
● Built-in loop/psc tester.
● Safety standard :
|
|
| SPECIFICATIONS |
| Loop Impedance |
|
|
|
Range
|
Measuring
range
|
Nominal test current at 0 Ω external loop
|
Accuracy
|
20 Ω
|
0.00~19.99 Ω
|
23A / 40ms
|
(2%rdg + 4dgt)
|
200 Ω
|
0.0~199.9 Ω
|
2.3A / 40ms
|
2000 Ω
|
0~1999 Ω
|
15mA / 400ms
|
| Prospective Short-circuit Current |
Range
|
Measuring
range
|
Nominal test current at 0 Ω external loop
|
Accuracy
|
20 KA
|
0.00~4.00 KA
|
23A / 40ms
|
Consider accuracy of loop impedance
|
2000 A
|
0~1999 A
|
23A / 40ms
|
200 A
|
0.0~199.9 A
|
2.3A / 40ms
|
| Voltage Display |
|
|
|
Measuring range
|
Accuracy
|
Remark
|
150~260 V
|
(2%rdg + 4dgt)
|
at 0 Ω external loop
|
| General |
|
|
|
| Temperature |
0 ~ 40 °C |
| System voltage |
230V |
+13% |
-15%
|
| System frequency |
50Hz |
| None Battery system voltage |
150V ~ 260V |
| Over Temperature Protection |
When overheating,the "  " symbol will show on the LCD, and the 8025LP stop measuring.
|
| Wiring check |
P-E |
LEDs illuminate when the wiring polarity of circuit under test is correct |
| P-N |
| N-E |
LED is light when P and N are reversed or the Earth is not connected. |
| 15mA Loop measurement |
Loop impedance 2000Ω range measurement is carried out with low test current (15mA).
The current will not cause tripping out for ELCBs. |
|
|
|
