对称式缆托-拉缆夹具 - KT4800

SKU: KT4800
KT4500, KT4600和KT4800系列的特点是具有一个圆形分切颏体。
弹簧锁扣可自动关闭以保护捏紧导线的意外脱离。
手柄处的大开口,可适用于多种钓钩,绞车和滑轮。
Round jaw.
Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists
Weight: 
9.00 lbs
4.08 kg
警告:拉缆夹为暂时安装使用,不可长期处于锚定状态。
警告:当使用或靠近电源线时,需先使拉缆夹处于落地绝缘以及隔离状态后再进行拉缆工作。
警告:不可C过载重量。
警告:必须使用与尺寸和类型匹配的拉缆夹具。
警告:每次使用前,需先清洁缆托并检查其工作状态,避免操作时滑落。S
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Always inspect equipment before use.
Do NOT exceed maximum safe load as listed on the label attached to the product.