|
| Circuit Breaker Timers
----------部分中文介绍产品已停产或参数有变更，内容仅供参考。 |
Circuit Breaker Timers
|
|
|
|
|
|
Circuit Breaker Coil Tester
|
|
|
|
|
|
|
|
|
Part Number(s)
View Full Specs
|
The CBCT is a variable voltage DC power supply designed specifically to test substation circuit-breaker Open and Close coils. The CBCT uses the substation’s DC power supply to electronically generate a programmable output voltage from 5% to 95% of the source voltage. The CBCT can maintain up to an 80A test current while maintaining 2% or better voltage regulation during the circuit breaker coil operation.
|
- One continuous and one pulse DC output
- Back-lit LCD screen (20 characters by 4 lines)
- Output voltage programmable from 5% to 95% of the input voltage
- Built-in, single channel timer
|
|
|
|
|
|
|
|
|
Digital Circuit Breaker Analyzer
|
|
|
|
|
|
|
|
|
Part Number(s)
9002-UC [CT-3500 S2]
View Full Specs
|
The CT-3500 S2 is Vanguard’s second generation, stand-alone, digital, microprocessor-controlled, circuit-breaker timer. It measures the elapsed time from the instant a breaker coil is energized to the instant of opening or closing of a circuit-breaker’s dry contacts. In addition to timing a breaker’s contact response time, the CT-3500 S2 can also time relays or other switching functions that use an initiating trigger voltage (24-300 Volts DC or AC). The timer-triggering voltage starts three independent electronic timers.
|
- Detect Main & Insertion Resistor Contacts on same input
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store 128 test records internally
- Initiate Breaker Operation
- Built-in 2.5" wide Thermal Printer
- Rugged "QWERTY" style membrane keypad
|
|
|
|
|
|
|
|
|
Digital Circuit Breaker Analyzer
|
|
|
|
|
|
|
|
|
Part Number(s)
9021-UC [CT-7000 S3 with 3 Contact Channels]
9100-UC [CT-7000 S3 with 6 Contact Channels]
9021-SC [CT-7000 S3 Shipping Case]
9021-DG [CT-7000 S3 Dual Ground Option]
9021-OT [CT-7000 S3 Online Timing Option]
9021-BT [CT-7000 S3 Bluetooth Option]
View Full Specs
|
The CT-7000 S3 is Vanguard's fourth generation EHV circuit breaker analyzer. The CT-7000 S3 is available with 3 (part number 9021-UC) or 6 contact timing channels (part number 9100-UC). The CT-7000 S3 can fully analyze a circuit breaker's performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Both contact and motion analysis can be performed on all circuit breaker operations (OPEN, CLOSE, OPEN-CLOSE, CLOSE-OPEN, and OPEN CLOSE-OPEN).
|
- Fully analyze circuit breaker's performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store up to 200 test records and 100 test plans internally
- Initiate Breaker Operation
- Built-in 4.5" wide Thermal Printer
- Rugged "QWERTY" style membrane keypad
- Optional "On-line" Timing Mode
- Optional dual ground testing mode
- Optional Bluetooth wireless computer interface
|
|
|
|
|
|
|
|
|
Digital Circuit Breaker Analyzer
|
|
|
|
|
|
|
|
|
Part Number(s)
9103-UC [CT-8000 S3 with 3 Contact Channels]
9104-UC [CT-8000 S3 with 6 Contact Channels]
9103-SC [CT-8000 S3 Shipping Case]
9103-DG [CT-8000 S3 Dual Ground Option]
9103-BT [CT-8000 S3 Bluetooth Option]
9103-OT [CT-8000 S3 Online Timing Option]
View Full Specs
|
The CT-8000 S3 is Vanguard's fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The CT-8000 S3 can fully analyze a circuit breaker's performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.
|
- Fully analyze circuit breaker's performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes
- Perform dynamic contact resistance test
- USB computer interface
- USB Flash drive interface (Flash drive not included)
- Store up to 200 test records and 100 test plans internally
- Initiate Breaker Operation
- Built-in 4.5" wide Thermal Printer
- Rugged "QWERTY" style membrane keypad
- Optional "On-line" Timing Mode
- Optional dual ground testing mode
- Optional Bluetooth wireless computer interface
|
|
|
|
|
|
|
|
|
EHV Circuit Breaker Analyzer
|
|
|
|
|
|
|
|
|
Part Number(s)
9005-UC [DigiTMR S2]
9005-OT [On-line Timing Option]
9005-BT [Bluetooth Option]
View Full Specs
|
The Vanguard DIGITMR S2 is an inexpensive, easy to use digital circuit breaker analyzer. The DIGITMR S2 can be operated stand-alone or can be computer-controlled. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact and motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). Timing results are recorded and displayed on the 240 x 128 pixels back-lit LCD screen and can also be printed on the built-in 4.5" wide thermal printer.
|
- Stand-alone, microcomputer-driven EHV Circuit Breaker Analyzer
- Analyzes contact time, stroke, velocity, over-travel, and contact wipe
- USB PC interface
- USB Flash drive interface
- Can store up to 200 test records and 100 test plans
- Built-in thermal printer
|
|
|
|
|
|
|
|
|
PC-controlled EHV Circuit Breaker Analyzer
|
|
|
|
|
|
|
|
|
Part Number(s)
9068-UC [DigiTMR S2 PC]
9068-OT [On-line Timing Option]
9068-BT [Bluetooth Option]
View Full Specs
|
The Vanguard DIGITMR S2 PC is an inexpensive, easy to use digital circuit breaker analyzer that is designed to be used with a PC. This inexpensive analyzer offers the most cost-effective method for testing circuit breakers. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact-motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open).
|
- Inexpensive, PC-controlled EHV circuit breaker analyzer
- Optional "on-line" timing mode
- Small and light-weight
- Can test contact time, stroke, velocity, over-travel, and contact wipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number(s)
9084-UC [Doble Transducer Adapter]
View Full Specs
|
The Doble Transducer Adapter can be used to interface any Doble travel transducer to a Vanguard circuit breaker analyzer.
|
|
|
|
|
|
|
|
|
|
Molded Case Circuit Breaker Tester
|
|
|
|
|
|
|
|
|
Part Number(s)
9066-UC [110V MCCB-250]
9067-UC [220V MCCB-250]
View Full Specs
|
The Vanguard MCCB-250 is a programmable, high-current source designed specifically for testing molded-case circuit breakers, thermal magnetic and solid-state overload motor-protection relays.
|
- 4 current-source outputs (i.e., 5 A @ 120 Vac, 25 A @ 24 Vac, 120 A @ 6 Vac, 250 A @ 3 Vac)
- 4-line by 20-character LCD display
- Provides external current input (0-10 A)
|
|
|
|
|
|
|
|
|
Molded Case Circuit Breaker Tester
|
|
|
|
|
|
|
|
|
Part Number(s)
9107-UC [110V MCCB-500]
9108-UC [220V MCCB-500]
View Full Specs
|
The Vanguard MCCB-500 is a microprocessor-based high current circuit breaker test set. This unit provides a variable high current source, control, metering, and timing circuitries for testing overload relays and thermal and magnetic circuit breakers.
|
- 3 current-source outputs: 500A @ 4 Vac, 125A @ 14Vac, and 25A @ 70Vac
- Built-in current meter
- Built-in timer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number(s)
9095-UC [Resistor Transducer Adapter]
View Full Specs
|
The Vanguard Resistor Transducer Adapter (RTA) can be used to connect any resistor type transducer to the digital transducer channel of a Vanguard circuit breaker analyzer. The RTA also features a 3-pin SwitchCraft connector that can directly interface with ABB resistor transducers.
|
|
|
|
|
|
|
|
|
|
Universal Power Supply
|
|
|
|
|
|
|
|
|
Part Number(s)
9064-UC [110V UPS S2]
9065-UC [220V UPS S2]
View Full Specs
|
The Vanguard Universal Power Supply Series 2 (UPS-S2) is designed and produced to meet a utility company's substation needs for an independent AC/DC power source. Both the AC and DC Voltage sources are capable of supplying 10 amperes continuously.
|
- Isolated variable 1-300 Vdc source
- Isolated variable 1-240 Vac source
- 10 ampere continuous current
|
|
|
